GRAPHENE WAX COATING PAINT PROTECTION

Advanced, graphene formula creates the most powerful shield against scratches, swirls and color fading • Super hydrophobic ceramic polymers allow rain to roll right off your car Super smooth glide-and-wipe application for effortless, brilliant shine

Revolutionary Technology Made with Graphene Infused

Graphene Infused Wax Paste Coat utilizes an innovative Graphene Oxide composite that bonds to form an impenetrable layer of protection. Our unique chemistry makes Graphene Infused Wax Paste Coat easier to install than ever before. Graphene infused Coatings do not harden or crystallize like a normal ceramic, reducing the risk of potentially irreversible high spots or streaking

Hydrophobic Nanotechnology

Graphene Infused Wax Paste Coat unparalleled ability to resist contamination is due to its extremely high surface sheer angle, shedding water and contaminants while reducing the risk of etching, water spotting, and staining. In addition to its resistance to abrasion, weathering, and oxidation, Graphene Wax Paste Coat  creates a layer that forms an almost impenetrable barrier on top of the surface once applied. 

✅Water repellence

✅Make Your Car Shine

✅Clear-coat safe

✅Transformed weathered & oxidized paint surface.

✅Polymers enable Graphene Infused Wax Paste to adhere to the high spots on the paint surface.

 Take a little bit from everything we have learned over the past 7 years, mash it into a 100 ml bottle, and extraordinary things are bound to happen. That's right, from the day we first started formulating and mixing products in the back of our shop, we have always envisioned a product like Graphene Infused Wax.

HOW TO USE?

STEP 1

Wash and dry your car.

STEP 2

For best product performance, prep the surface of your car using a Shampoo as needed to remove any dirt and residues from the finish.

STEP 3

Apply Graphene wax coat to a 2 x 2 area using a foam applicator/microfiber towel, buffing product into the finish with overlapping circular motions.

STEP 4

Repeat Step 3 on each 2 x 2 section of your car until all exterior panels have been covered.

STEP 5

Allow product to dry for 2-5 minutes or until it has turned to a light haze.

STEP 6

Fold a soft microfiber cloth and gently wipe away excess wax.

STEP 7

Turn microfiber over to a fresh side and buff your finish to a high-gloss shine.

NOTE: It usually takes 3-5 minutes for it to haze. It will not leave behind white residue, but we advise to not get the product on your plastic parts.